Difference between revisions of "Makerbot"

From Hacklab.TO Public Wiki
Jump to: navigation, search
(Add features, update status)
 
Line 2: Line 2:
  
 
== Status ==
 
== Status ==
<b>This printer is no longer in use.</b>
+
<onlyinclude>
 +
* Hasn't been used in ages
 +
* Connected to a paste extruder</onlyinclude>
 +
 
 +
== Features ==
 +
 
 +
* MakerBot Cupcake
 +
* Lots and lots of aftermarket 3D printed parts
  
 
== Usage ==
 
== Usage ==

Latest revision as of 17:12, 1 February 2017

Makerbot Cupcake

Status[edit]

  • Hasn't been used in ages
  • Connected to a paste extruder

Features[edit]

  • MakerBot Cupcake
  • Lots and lots of aftermarket 3D printed parts

Usage[edit]

The cupcake now runs off the same toolchain as the ultimakers, running the same Marlin firmware. This means you can treat it almost identially. (eg: Use Cura/tegh)

You will have to download the Cura profile from github [1] and set the dimensions in cura to match the machine. (This cannot be embedded in the profile for some reason.)

Operating ABP in tegh[edit]

The bed can be heated similar to the extruder. Note that it overshoots, raise the temperature slowly, and don't set it above 85C.

 set temp b:85

Sub Pages[edit]

Donations[edit]