81
edits
Type A: Difference between revisions
Jump to navigation
Jump to search
Add features, update status and log
(→Status) |
(Add features, update status and log) |
||
| Line 1: | Line 1: | ||
[[File:TypeAJan52016.JPG|thumb|300px|Type A]] | [[File:TypeAJan52016.JPG|thumb|300px|Type A]] | ||
This page documents Type A | This page documents the Type A Series 1 (2013 plywood model). | ||
Type A lives on the third shelf of the 3D printer tower, next to [[Ultimaker 2]] | |||
==Status== | ==Status== | ||
<onlyinclude> | |||
* '''Severely under-extruding, probably needs a good nozzle cleaning''' | |||
* Loaded with white 1.75mm PLA | |||
* '''PLA ONLY!''' (to prevent nozzle contamination) | |||
* [[3D_Printers#Cura_15|Cura 15 Settings here]] | |||
* '''http://octopi3.hacklab.to/'''</onlyinclude> | |||
* | == Features == | ||
* | |||
* Type A Series 1 (2013 plywood model). | |||
* 254 x 230 x 230 mm print volume | |||
* 1.75mm filament | |||
* .35mm nozzle | |||
* Temperatures readings are lower than Ultimakers (e.g.: 190 for PLA compared to 210 on Ultimaker) | |||
* It is managed and accessible from the web GUI: '''http://octopi3.hacklab.to/''' | * It is managed and accessible from the web GUI: '''http://octopi3.hacklab.to/''' | ||
* Its manual is at http://bit.ly/1NDToMT | * Its manual is at http://bit.ly/1NDToMT | ||
| Line 16: | Line 29: | ||
!Entry By | !Entry By | ||
|- | |- | ||
|January 2017 | |||
|Attempted cleaning nozzle, printer still under-extruding | |||
|ran0 | |||
|- | |||
|January 28 2016 | |January 28 2016 | ||