Page history
3 November 2018
Igor
→Troubleshooting: How to reset LinuxCNC state, remove instructions about old blower
−591
Igor
Speed-independent power, Spindle Override slider
+3,362
Igor
→LinuxCNC operation: formula for laser output with M3 S#
+161
Igor
→How Our Laser Uses G-code: update resolution, link to linuxcnc gcode documentation
m+131
Igor
→Graster Conversion Workflow: update instructions for graster2
+1,499
Igor
Replace EMC2 with LinuxCNC
m+42
Igor
Moved incorrectly indented Techniques section
m−82
Igor
→General Workflow Overview: add reference to #Inkscape_gcodetools_Workflow
m+66
Igor
→General Workflow Overview: Fix order of turning things on, update labels of the override on/off armed/safe switch, note about Spindle Override
m+104
Igor
→Capabilities: Update working area, resolution from hacklab-engraver3.ini, update mentions of EMC2 to LinuxCNC
m+105
23 July 2018
1 May 2018
Igor
→Converting Files: Added fusion360 postproc
+81
Igor
Added Manufacturer Manuals, fixed See Also links
+195
23 March 2018
23 June 2017
9 June 2017
3 November 2016
21 September 2016
7 May 2016
30 June 2015
7 June 2015
6 June 2015
29 May 2015
6 January 2015
21 December 2014
12 August 2014
30 June 2014
F3ndot
→Power Controller: Fix title again and Bottom PLC indent
+3
F3ndot
→Power Controller
+42
F3ndot
→Power Controller: Add picture and fix title
+47
29 June 2014
F3ndot
Add picture of laser cutter
+39
F3ndot
F3ndot moved page LaserManual to Laser Manual: Should have a space to conform with rest of articles
mF3ndot
1 revision: Import Laser category
m