Laser Power Controller: Difference between revisions
Jump to navigation
Jump to search
no edit summary
No edit summary |
No edit summary |
||
| Line 26: | Line 26: | ||
** Tip/Ring connected together when everything is normal, connection broken when in E-STOP. | ** Tip/Ring connected together when everything is normal, connection broken when in E-STOP. | ||
** Sleeve not used | ** Sleeve not used | ||
* Warning Light - Connect to 1/4" plug coming from the light | * Warning Light - Connect to 1/4" plug coming from the light on the ceiling. | ||
** Provides +12V when tube is powered. | ** Provides +12V when tube is powered. | ||
* Power input - Connect to NEMA 5-15p to IEC C19 cord | * Power input - Connect to NEMA 5-15p to IEC C19 cord | ||
| Line 33: | Line 33: | ||
* Turn the selector switch to READY to turn on the laser control power | * Turn the selector switch to READY to turn on the laser control power | ||
* To ready the tube | * To ready the tube | ||
*# Press and hold START on the Laser Power Controller to activate the tube output. | *# Press and hold START on the Laser Power Controller to activate the tube output. | ||
*#* You should hear the tube's cooling fans turn on. | *#* You should hear the blower in the shop turn on, then the tube's cooling fans turn on. | ||
*# You are now ready to laser. | *# You are now ready to laser. | ||