3D Printers/FlashForge Creator Pro: Difference between revisions

3D Printers/FlashForge Creator Pro (view source)

1 byte added , 12 January 2019

251

edits

@@ Line 14: / Line 14: @@
 !Date
 !Filament type, colour, brand
-!<span style="{{Transform-rotate|270}}">First Layer</span>
+!First layer
 !Other layers
 !Notes
@@ Line 23: / Line 23: @@
 | Nozzle: 240, Bed: 110
 | Nozzle: 240, Bed: 110
-| DO NOT use enclosed chamber. Weird, I know. Put a fan on it after the 1st layer. 1st layer may be wavy, you may have to slow down the 1st layer speed to like 15-20 mm/s, or perhaps maybe the bed's too hot??  .....   (╯⊙﹏⊙)╯︵ ┴─┴
+| DO NOT use enclosed chamber. Weird, I know. Put a fan on it after the 1st layer. 1st layer may be wavy, you may have to slow down the 1st layer speed to like 15-20 mm/s, or perhaps maybe the bed's too hot?? **biting nails emoji**
-Thanks to Zach for suggesting not to use an enclosed chamber, it was driving me flipping insane.
+Thanks to Zach for suggesting not to use an enclosed chamber, it was driving me flipping insane......   (╯⊙﹏⊙)╯︵ ┴─┴
 |-
@@ Line 31: / Line 31: @@
 | Nozzle: 235, Bed: 110
 | Nozzle: 230, Bed: 110
-| Use enclosed chamber. Settings still not tweaked precisely, may over-extrude. Try lowering the temp by 5 deg, or set extrusion to 0.95.
+| Use enclosed chamber. Works decently but these settings are still not tweaked precisely, may over-extrude. Try lowering the temp by 5 C, or set extrusion to 0.95.
 |-