Laser Manual: Difference between revisions
Jump to navigation
Jump to search
→Materials
| Line 217: | Line 217: | ||
| Cardboard || None || Faint-to-medium discoloration to cutting with minimal smoke || Good for initial test runs of jobs. Use a high feed rate to avoid burning. || N/A || F50-F100, Power 8. | | Cardboard || None || Faint-to-medium discoloration to cutting with minimal smoke || Good for initial test runs of jobs. Use a high feed rate to avoid burning. || N/A || F50-F100, Power 8. | ||
|- | |- | ||
| Polycarbonate || Lexan, Makrolon || Smoke and flame | | Polycarbonate || Lexan, Makrolon || Smoke and flame || Bad for lasering, creates highly toxic fumes and messy ash. || ? | ||
|- | |- | ||
| Anodized Alumnium || || Surface etching || Anodized aluminum can be marked (but not cut) || N/A || Full power | | Anodized Alumnium || || Surface etching || Anodized aluminum can be marked (but not cut) || N/A || Full power | ||