251
edits
3D Printers/Creality K1: Difference between revisions
Jump to navigation
Jump to search
→Status
No edit summary |
(→Status) |
||
| Line 8: | Line 8: | ||
* It should "just work" using the electronics bench computer and Creality Slicer 5.0, will be able to use the "LAN printing" (printing over wifi) too | * It should "just work" using the electronics bench computer and Creality Slicer 5.0, will be able to use the "LAN printing" (printing over wifi) too | ||
</onlyinclude> | </onlyinclude> | ||
* The printer moves so fast, you may have to bump up nozzle temperature to get strong layer adhesion. I found printing PETG at 250C would look nice but with very weak layer adhesion | * The printer moves so fast, you may have to bump up nozzle temperature to get strong layer adhesion. I found printing PETG at 250C would look nice but with very weak layer adhesion, at 275C got strong adhesion | ||
* If printing organic models and the quality is less than you want, easiest way to increase quality is to slow down print speed (can do it on the printer's touchscreen). Try 75%. Otherwise tinker with the settings. | * If printing organic models and the quality is less than you want, easiest way to increase quality is to slow down print speed (can do it on the printer's touchscreen). Try 75%. Otherwise tinker with the settings. | ||