251
edits
3D Printers/Creality K1: Difference between revisions
Jump to navigation
Jump to search
no edit summary
No edit summary |
No edit summary |
||
| Line 16: | Line 16: | ||
** The real way but also easy is to lower the max volumetric speed in the slicer, it is set to 32 mm^3/s, people print at 15 or 20 mm^3/s (Creality slicer 5.0 -> Material panel on right side -> at top of it there is the material name, click on the down arrow, a temperature input should come up, click the pencil icon beside the bed temperature -> toggle advanced to on then type in "volume")(this slicer is such hot garbage lol but meh) | ** The real way but also easy is to lower the max volumetric speed in the slicer, it is set to 32 mm^3/s, people print at 15 or 20 mm^3/s (Creality slicer 5.0 -> Material panel on right side -> at top of it there is the material name, click on the down arrow, a temperature input should come up, click the pencil icon beside the bed temperature -> toggle advanced to on then type in "volume")(this slicer is such hot garbage lol but meh) | ||
** The real real way is to adjust all the settings. Try searching reddit for new Orca slicer profiles (should be easy to download and then import into orca slicer). The thing is those profiles may just be <2x as fast as the prusa mini's, not 3.5x | ** The real real way is to adjust all the settings. Try searching reddit for new Orca slicer profiles (should be easy to download and then import into orca slicer). The thing is those profiles may just be <2x as fast as the prusa mini's, not 3.5x | ||
== Usage == | == Usage == | ||
| Line 76: | Line 56: | ||
For printing over wifi, connect to the hacklab wifi, go to "Device" tab (select it from top middle), "+ scan add" (top right), the printer should show up. | For printing over wifi, connect to the hacklab wifi, go to "Device" tab (select it from top middle), "+ scan add" (top right), the printer should show up. | ||
=== | === Creality Print 9.0 Print Profiles === | ||
{| cellpadding="5" cellspacing="0" border="1" | |||
!Date | |||
!Filament type | |||
!Uploader | |||
!Link to config | |||
!Notes | |||
|- | |||
|June 14, 2024 | |||
|PETG | |||
|Rana | |||
| | |||
|max volumetric speed is 30 mm^3/s, outer wall prints first, 2 walls, 15% infill | |||
|- | |||
|June 14, 2024 | |||
|PETG | |||
|Rana | |||
| | |||
|max volumetric speed is 30 mm^3/s, outer wall prints first, 6 walls, 45% infill | |||
|- | |||
|} | |||
=== Set up your own profile === | === Set up your own profile === | ||