251
edits
(→Status) |
|||
Line 6: | Line 6: | ||
* Only printed with PETG so far.... will test other settings soon. | * Only printed with PETG so far.... will test other settings soon. | ||
* Printer is currently perma-loaded with white Elegoo Rapid PETG; use glue stick on the bed!!! | * Printer is currently perma-loaded with white Elegoo Rapid PETG; use glue stick on the bed!!! | ||
* It should "just work" using the electronics bench computer and Creality Slicer 5.0, | * It should "just work" using the electronics bench computer and Creality Slicer 5.0, able to use the "LAN printing" (printing over wifi) | ||
</onlyinclude> | </onlyinclude> | ||
* Print monitoring page (must be on the hacklab wifi): http://192.168.133.60/#/home | * Print monitoring page (must be on the hacklab wifi): http://192.168.133.60/#/home |