251
edits
Line 53: | Line 53: | ||
* The fan in the print head is really noisy when running fast ("model fan" or "part cooling fan"), making an annoying high pitch noise. At ~60% or below the pitch is bearable. | * The fan in the print head is really noisy when running fast ("model fan" or "part cooling fan"), making an annoying high pitch noise. At ~60% or below the pitch is bearable. | ||
* The official creality PETG profile has the model fan at ~90% and the side fan at 0%, however this is so noisy and annoying lol | * The official creality PETG profile has the model fan at ~90% and the side fan at 0%, however this is so noisy and annoying lol | ||
* Rana has changed | * Rana has changed his PETG cooling profile so the model fan is max 60% and the side fan is running at 60% constantly. These settings are on the soldering bench computer too. | ||
**Note for very small layer times the model fan still goes above 90% and makes the annoying sound | |||
* If you wish to change these settings, they are in the material profile: | * If you wish to change these settings, they are in the material profile: | ||
** Creality slicer 5.0 -> "Material" in the top right corner, click the down arrow, the nozzle and bed temp will show, click the pencil icon to the right of them. | ** Creality slicer 5.0 -> "Material" in the top right corner, click the down arrow, the nozzle and bed temp will show, click the pencil icon to the right of them. |