3D Printers/Ender 5 plus: Difference between revisions

3D Printers/Ender 5 plus (view source)

74 bytes added , 28 August

251

edits

@@ Line 7: / Line 7: @@
 **The printer should be "set and forget", the touch probe and the bed mesh should give perfect first layers everytime. Still wipe the build plate with isopropyl though!
 **Live z-adjust is called "baby stepping", you will see it on the screen when a print job is running.
-* Using the '''0.4mm layer height is recommended'''; it is hitting the max volumetric flow at this setting. Using smaller layer heights will increase time significantly and Rana's has not tested them. Using the 0.75mm layer height setting will save about 15-25% time
+* Using the '''0.4mm layer height is recommended'''; it is hitting the max volumetric flow at this setting. Using smaller layer heights will increase time significantly (since the max flowrate is not being reached) and Rana's has not tested them. Using the 0.75mm layer height setting may perhaps save about 15-25% time for certain objects.
 * No filament runout sensor is installed. But one day it will be !!
 </onlyinclude>