Industrial Fidget Controller: Difference between revisions

Jump to navigation Jump to search
(Partial commit)
Line 41: Line 41:


* Note: J1-J4 are NOT hot-pluggable. Please power down the unit before disconnecting these.
* Note: J1-J4 are NOT hot-pluggable. Please power down the unit before disconnecting these.
* Connectors are GX16 8-contact connectors, bulkhead-pin, plug-socket and standard keying.
===J1 and J2 Key-Stations===
{| class="wikitable"
|-
! Pin
! Wire Colour
! Designation
! PLC Contact
|-
| 1
| GRN
| GND
|
|-
| 2
| GND/WHT
| GND
|
|-
| 3
| ORG
| Toggle Switch
| 3-X1, or 3-X3
|-
| 4
| ORG/WHT
| Key Switch
| 3-X2, or 3-X4
|-
| 5
| BLU
| N/C
|
|-
| 6
| BLU/WHT
| Backlight Enable (Future)
| 2-Y6, or 2-Y7
|-
| 7
| BRN
| +24V
|
|-
| 8
| BRN/WHT
| +24V
|
|}
===J3 Expansion===
* This is an unimplemented future expansion which permits 4 switch contacts.
{| class="wikitable"
|-
! Pin
! Wire Colour
! Designation
! PLC Contact
|-
| 1
| GRN
| GND
|
|-
| 2
| GND/WHT
| GND
|
|-
| 3
| ORG
| SW1
| 3-X5
|-
| 4
| ORG/WHT
| SW2
| 3-X6
|-
| 5
| BLU
| SW3
| 3-X7
|-
| 6
| BLU/WHT
| SW4
| 3-X8
|-
| 7
| BRN
| +24V
|
|-
| 8
| BRN/WHT
| +24V
|
|}
===J4 - Coin Acceptor===
* Warning: The coin acceptor mechanism requires +12V - do not connect it to J1, J2, or J3 or damage will occur.
{| class="wikitable"
|-
! Pin
! Wire Colour
! Designation
! PLC Contact
|-
| 1
| GRN
| GND
|
|-
| 2
| GND/WHT
| GND
|
|-
| 3
| ORG
| GND
| COM2
|-
| 4
| ORG/WHT
| RS232 TX
| COM2
|-
| 5
| BLU
|
|
|-
| 6
| BLU/WHT
|
|
|-
| 7
| BRN
| +12V
|
|-
| 8
| BRN/WHT
| +12V
|
|}
16

edits

Navigation menu