Search results
Jump to navigation
Jump to search
- The sander is on a stand with wheels and is stored on the left of the mill. * Model: Busy Bee SB-6x12 ...4 KB (755 words) - 07:27, 16 January 2019
- This is Hacklab's main lathe. It was purchased by lab members from Busy Bee tools in 2016 ...down from threading feed, there is no safety clutch, so don't run it into the ends! ...4 KB (557 words) - 05:29, 30 December 2022
- * [[:File:CT054.pdf|Busy Bee manual]] * A set of tools and accessories are available to use with the machine or you can bring your own ...7 KB (1,108 words) - 15:37, 23 July 2019
- * The spindle motor can be manually moved up/down to accommodate larger/smaller w * Table size: 8" x 16" fixture plate 0.4" thick acting as the table ...5 KB (819 words) - 15:28, 7 March 2020
- The lathe should both be '''powered off''' and '''unpluged''' when: * If you have to leave the lathe unattended, or you are done using it. ...8 KB (1,388 words) - 18:04, 29 March 2022
- *The Tormach was donated by Autodesk ...as our mill clamping kit! Do not force those studs into the Tormach plate! The mill kit uses 3/8-16 threads) ...7 KB (1,060 words) - 16:17, 6 March 2023