Home Assistant Demo Lab: Difference between revisions

Jump to navigation Jump to search
no edit summary
No edit summary
No edit summary
Line 1: Line 1:
== Quick Start Guide ==
== Quick Start Guide ==


The Home Assistant Lab is a self-contained network + server assembled into a ready to go package that only require a single power and upstream network connection.
The Home Assistant demolab is a self-contained network + server assembled into a ready to go package that only require a single power and upstream network connection.


=== Setup ===
=== Setup ===
Retrieve lab rig from members cube S4.
Place the demolab at either the hot-desks or electronics bench. These locations have mains power and hacklab wired network connections available.
Attach hacklab wired network to WAN port (blue) on the Router ([[HL0087]]).
Attach demolab powerbar to a mains outlet. Make sure powerbar is switched on.
Wait 1min for Router to stabilize. Press powerbutton on Home Assistant server ([HL0088]]).


=== Shutdown / Storage Procedure ===
=== Shutdown / Storage Procedure ===


Gracefully turn off Home Assistant server.
On the Home Assistant's [http://homeassistant.demolab.in.hacklab.to:8123/config/hardware Hardware Page]
# Power Symbol, Top Right Corner
# "Shut down system"
The Router and Zigbee Router are sudden power-loss tolerant. It is now safe turn off the demolab powerbar and unplug the main power cable.
Return lab rig to member's cube S4


== Lab Configuration / Reset Instructions ==
== Lab Configuration / Reset Instructions ==
173

edits

Navigation menu