Home Assistant Demo Lab: Difference between revisions
Jump to navigation
Jump to search
no edit summary
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
== Quick Start Guide == | == Quick Start Guide == | ||
The Home Assistant | The Home Assistant demolab is a self-contained network + server assembled into a ready to go package that only require a single power and upstream network connection. | ||
=== Setup === | === Setup === | ||
Retrieve lab rig from members cube S4. | |||
Place the demolab at either the hot-desks or electronics bench. These locations have mains power and hacklab wired network connections available. | |||
Attach hacklab wired network to WAN port (blue) on the Router ([[HL0087]]). | |||
Attach demolab powerbar to a mains outlet. Make sure powerbar is switched on. | |||
Wait 1min for Router to stabilize. Press powerbutton on Home Assistant server ([HL0088]]). | |||
=== Shutdown / Storage Procedure === | === Shutdown / Storage Procedure === | ||
Gracefully turn off Home Assistant server. | |||
On the Home Assistant's [http://homeassistant.demolab.in.hacklab.to:8123/config/hardware Hardware Page] | |||
# Power Symbol, Top Right Corner | |||
# "Shut down system" | |||
The Router and Zigbee Router are sudden power-loss tolerant. It is now safe turn off the demolab powerbar and unplug the main power cable. | |||
Return lab rig to member's cube S4 | |||
== Lab Configuration / Reset Instructions == | == Lab Configuration / Reset Instructions == | ||