Type A: Difference between revisions

Jump to navigation Jump to search

Type A (view source)

Revision as of 19:24, 28 August 2017

61 bytes removed ,  28 August 2017
→‎Features: updates for new head assembly
(→‎Features: updates for new head assembly)
Line 44: Line 44:
* 1.75mm filament
* 1.75mm filament
* .4mm nozzle
* .4mm nozzle
* Temperatures readings are lower than Ultimakers (e.g.: 190°C for PLA compared to 210°C on Ultimaker)
* As the head uses a Teflon insert, '''do NOT run at more than 240°C''' (250°C absolute maximum temp.???)
* Do NOT run at more than 220°C (which should correspond to a real temp. of aprox. 240°C)
* It is managed and accessible from the web GUI: '''http://octopi3.hacklab.to/'''
* It is managed and accessible from the web GUI: '''http://octopi3.hacklab.to/'''
* Its manual is at http://bit.ly/1NDToMT
* Its manual is at http://bit.ly/1NDToMT (our Head Assembly is different.)


==Machine Log==
==Machine Log==
Allen
283

edits

Retrieved from "https://knowledge.hacklab.to/wiki/Special:MobileDiff/1334"

Navigation menu