Type A: Difference between revisions
Jump to navigation
Jump to search
→Status: update based on last use
(→Status: update based on last use) |
|||
Line 6: | Line 6: | ||
==Status== | ==Status== | ||
<onlyinclude> | <onlyinclude> | ||
Zero Stop is out ... turn Z shaft '''clockwise''' to get flat/sticking filament | |||
* '''LIMITED USE''' ... only print using PETG (2nd Printhead for PLA coming.) | * '''LIMITED USE''' ... only print using PETG (2nd Printhead for PLA coming.) | ||
* The Printhead Heatsink Fan is '''always on''' ... so don't leave this printer powered on for long periods of time without printing. | * The Printhead Heatsink Fan is '''always on''' ... so don't leave this printer powered on for long periods of time without printing. |