Type A: Difference between revisions

Type A (view source)

2 bytes removed , 26 November 2017

m

283

edits

@@ Line 78: / Line 78: @@
 * Enable Costing: SELECTED
 ** Costing Volume: 1.0 mm<sup>3</sup> (aprox. 150% the Cura 3 default value)
-The '''new''' (experimental) Costing Feature of Cura 3 is what enables the above settings to provide a very noticeable improvement in the PETG print quality. Where using Costing together with a smaller retraction works far far better than using just retractions.
+The '''new''' (experimental) Costing Feature of Cura 3 is what enables the above settings to provide a very noticeable improvement in the PETG print quality. Where using Costing together with a small retraction works far far better than using just retractions.
 <br />&nbsp;