Type A: Difference between revisions
Jump to navigation
Jump to search
m
→Recommended Filament Settings
(→Recommended Filament Settings: Additional Updates for PETG) |
|||
Line 78: | Line 78: | ||
* Enable Costing: SELECTED | * Enable Costing: SELECTED | ||
** Costing Volume: 1.0 mm<sup>3</sup> (aprox. 150% the Cura 3 default value) | ** Costing Volume: 1.0 mm<sup>3</sup> (aprox. 150% the Cura 3 default value) | ||
The '''new''' (experimental) Costing Feature of Cura 3 is what enables the above settings to provide a very noticeable improvement in the PETG print quality. Where using Costing together with a | The '''new''' (experimental) Costing Feature of Cura 3 is what enables the above settings to provide a very noticeable improvement in the PETG print quality. Where using Costing together with a small retraction works far far better than using just retractions. | ||
<br /> | <br /> | ||