Type A: Difference between revisions
Jump to navigation
Jump to search
→Status: update based on usage.
(→Status: update based on usage.) |
|||
| Line 6: | Line 6: | ||
==Status== | ==Status== | ||
<onlyinclude> | <onlyinclude> | ||
'''Printbed is warped''', with the zero stop set for a high center. The | '''Printbed is warped''', with the zero stop set for a high center. (Use a large brim to help keep your prints "stuck".) The X-axis shifts (due to a belt loosening) have been a problem. So don't try loooong prints, until this printer is '''proven''' to be reliable. | ||
* '''Operational''' ... use PETG head '''only''' for PETG, and the PLA head '''only''' for PLA. | * '''Operational''' ... use PETG head '''only''' for PETG, and the PLA head '''only''' for PLA. | ||
* The Printhead Heatsink Fan is '''always on''' ... so don't leave this printer powered on for long periods of time without printing. | * The Printhead Heatsink Fan is '''always on''' ... so don't leave this printer powered on for long periods of time without printing. | ||