Ultimaker 2: Difference between revisions
Jump to navigation
Jump to search
→Status: small correction
(→Known Issues and Fixes: update "known good" print settings) |
(→Status: small correction) |
||
| Line 6: | Line 6: | ||
==Status== | ==Status== | ||
<onlyinclude> | <onlyinclude> | ||
*'''Last known good settings''': (10-Aug-2017, Pink PLA) '''220°''', 110% flow, print @ ''' | *'''Last known good settings''': (10-Aug-2017, Pink PLA) '''220°''', 110% flow, print @ '''30mm/s''' (1/2 speed), travel @ '''60mm/s''' (also 1/2 speed), 0.4 mm nozzle size, 2.85mm filament size. | ||
* Operational ... it can be '''Problematic''' | * Operational ... it can be '''Problematic''' | ||
** Using a Brim to hold parts to the Print Bed is strongly recommended. | ** Using a Brim to hold parts to the Print Bed is strongly recommended. | ||