Ultimaker 2: Difference between revisions
Jump to navigation
Jump to search
→Status
(→Known Issues and Fixes: update for 135% flow) |
(→Status) |
||
Line 6: | Line 6: | ||
==Status== | ==Status== | ||
<onlyinclude> | <onlyinclude> | ||
*'''Last known good settings''': ( | Black PLA/PHA Filament to print parts for "Mother of all Cable Racks" Project. | ||
*'''Last known good settings''': (28-Sept-2017, PLA/PHA) '''220°''', 110% flow, print @ '''30mm/s''' (1/2 speed), travel @ '''60mm/s''' (also 1/2 speed), 0.4 mm nozzle size, 2.85mm filament size. | |||
* Operational ... it can be '''Problematic''' | * Operational ... it can be '''Problematic''' | ||
** Using a Brim to hold parts to the Print Bed is strongly recommended. | ** Using a Brim to hold parts to the Print Bed is strongly recommended. |