Type A: Difference between revisions
Jump to navigation
Jump to search
→Known Issues and Fixes: add Cyclone Filament
(→Known Issues and Fixes: add Cyclone Filament) |
|||
Line 27: | Line 27: | ||
* This Printer has a '''removable printbed'''. So before printing, make sure that '''all 4 screwheads''' are forward to properly secure the printbed. | * This Printer has a '''removable printbed'''. So before printing, make sure that '''all 4 screwheads''' are forward to properly secure the printbed. | ||
'''IMPORTANT:''' All PETG filaments are '''not''' the same. This printer can '''only''' use PETG filaments where the maximum recommended printing temperature is '''240°C'''. (MG Chemicals, Spool3D.ca & | '''IMPORTANT:''' All PETG filaments are '''not''' the same. This printer can '''only''' use PETG filaments where the maximum recommended printing temperature is '''240°C'''. (MG Chemicals, iPrint-3D, Spool3D.ca & Cyclone Filament are some sources for that.) Most PETG filaments have a maximum recommended temperature of 260°C to 265°C. | ||
==Recommended Filament Settings== | ==Recommended Filament Settings== |