Type A: Difference between revisions
Jump to navigation
Jump to search
→Status
(→Machine Log: adjust Y axis current) |
(→Status) |
||
Line 6: | Line 6: | ||
==Status== | ==Status== | ||
<onlyinclude> | <onlyinclude> | ||
'''STILL GETTING LARGE X-AXIS SHIFTS ... DO NOT USE!''' | |||
'''Printbed is warped''', with the zero stop set for a high center. (Use a large brim to help keep your prints "stuck".) So if needed, turn the Z-axis rod '''clockwise''' to bring the print head slightly closer to the build platform. Also, the X-axis shifts (due to a belt loosening) have been a problem. So don't try loooong prints, until this printer is '''proven''' to be reliable. | '''Printbed is warped''', with the zero stop set for a high center. (Use a large brim to help keep your prints "stuck".) So if needed, turn the Z-axis rod '''clockwise''' to bring the print head slightly closer to the build platform. Also, the X-axis shifts (due to a belt loosening) have been a problem. So don't try loooong prints, until this printer is '''proven''' to be reliable. | ||
* '''Operational''' ... use PETG head '''only''' for PETG, and the PLA head '''only''' for PLA. | * '''Operational''' ... use PETG head '''only''' for PETG, and the PLA head '''only''' for PLA. | ||
* The Printhead Heatsink Fan is '''always on''' ... so don't leave this printer powered on for long periods of time without printing. | * The Printhead Heatsink Fan is '''always on''' ... so don't leave this printer powered on for long periods of time without printing. | ||
* Loaded with 1.75mm Black | * Loaded with 1.75mm Black MG Chemicals PETG | ||
* [[3D_Printers#Cura_15|Cura 15 Settings here]] | * [[3D_Printers#Cura_15|Cura 15 Settings here]] | ||
* '''http://octopi3.hacklab.to/'''</onlyinclude> | * '''http://octopi3.hacklab.to/'''</onlyinclude> |