Type A: Difference between revisions
Jump to navigation
Jump to search
m
→Cura 3 Settings for this Printer: formatting edit
(→Recommended Filament Settings: formatting edit) |
m (→Cura 3 Settings for this Printer: formatting edit) |
||
| Line 137: | Line 137: | ||
==Cura 3 Settings for this Printer== | ==Cura 3 Settings for this Printer== | ||
In Cura 3.3.1, to use the below settings, create a '''Custom FDM printer''', then edit the '''Machine Settings''' for that printer to contain the following:<br /> | In Cura 3.3.1, to use the below settings, create a '''Custom FDM printer''', then edit the '''Machine Settings''' for that printer to contain the following:<br /> | ||
'''PRINTER TAB'''<br /> | ... '''PRINTER TAB'''<br /> | ||
'''Printer Settings''' | '''Printer Settings''' | ||
* X (Width): 254 mm | * X (Width): 254 mm | ||
| Line 181: | Line 181: | ||
G90 ;absolute positioning | G90 ;absolute positioning | ||
</code> | </code> | ||
'''EXTRUDER 1 TAB'''<br /> | ... '''EXTRUDER 1 TAB'''<br /> | ||
* Material Diameter: 1.75 mm | * Material Diameter: 1.75 mm | ||
* Nozzle size: 0.4 mm | * Nozzle size: 0.4 mm | ||