Type A: Difference between revisions
Jump to navigation
Jump to search
m
→Recommended Filament Settings: formatting edit
(→Recommended Filament Settings: add travel speed note) |
m (→Recommended Filament Settings: formatting edit) |
||
Line 136: | Line 136: | ||
* Support Placement: Everywhere (Use "Touching Build Plate" when appropriate.) | * Support Placement: Everywhere (Use "Touching Build Plate" when appropriate.) | ||
* Support Overhang Angle: 50 ° | * Support Overhang Angle: 50 ° | ||
* Support Pattern: Lines ( | * Support Pattern: Lines (Least difficult to remove support type for PETG.) | ||
* Support Wall Line Count: 1 (This makes supports print '''much''' better.) | * Support Wall Line Count: 1 (This makes supports print '''much''' better.) | ||
* Support Density: 20% (Needs more than PLA.) | * Support Density: 20% (Needs more than PLA.) |