PCNC1100: Difference between revisions
Jump to navigation
Jump to search
no edit summary
m (Wtgibson moved page CNC Milling Machine to PCNC1100 without leaving a redirect: There is more than one cnc milling machine) |
No edit summary |
||
| Line 82: | Line 82: | ||
'''Flood Coolant''' | '''Flood Coolant''' | ||
Qualichem XTREME CUT 250C | |||
Source: torontolube.com, Alan at customerservice@torontolube.com - 1 gallon jug is all we need, which is below their minimum quantity - but they made an exception. | |||
Dilute to 8-10% by adding concentrate to tap water (not the other way around!) | |||
Measure with refractometer and add water regularly to compensate for evaporation | |||
Skim to remove oil regularly (oil grows bacteria) | |||
Agitate with air regularly (todo aquarium pump) | |||
'''Items to purchase''' | '''Items to purchase''' | ||
*Replacement for TTS set screws (per NYC CNC for this machine): McMaster p/n 92311A556 (1/4x28 Stainless Set Screw). Larger Tormach Set Screw holders use 3/8x24 (McMaster 92311A635) | *Replacement for TTS set screws (per NYC CNC for this machine): McMaster p/n 92311A556 (1/4x28 Stainless Set Screw). Larger Tormach Set Screw holders use 3/8x24 (McMaster 92311A635) | ||
*[https://www.nyccnc.com/buy-tormach-pcnc-1100-cnc-mill/| NYC CNC "What to buy for Tormach PCNC1100" (this machine)] | *[https://www.nyccnc.com/buy-tormach-pcnc-1100-cnc-mill/| NYC CNC "What to buy for Tormach PCNC1100" (this machine)] | ||
* | *Coolant (IN PROGRESS - WG) | ||
* | *Busy bee 10mm clamp kit (IN PROGRESS - WG) | ||
*Aquarium air pump for coolant, to run a few hours a day | |||
Sources: | |||
*https://www.maritool.com | *https://www.maritool.com | ||
*https://www.lakeshorecarbide.com/ | *https://www.lakeshorecarbide.com/ | ||
*http://torontolube.com/ | |||
[https://www.nyccnc.com/speeds-feeds-excel-worksheet/| NYC CNC Speeds and Feeds worksheet] | [https://www.nyccnc.com/speeds-feeds-excel-worksheet/| NYC CNC Speeds and Feeds worksheet] | ||