3D Printers/Creality K1: Difference between revisions

Jump to navigation Jump to search
no edit summary
No edit summary
No edit summary
Line 50: Line 50:


== Note about noise and cooling ==
== Note about noise and cooling ==
* The fan in the print head is really noisy when running fast, making an annoying high pitch noise. At ~60% or below the pitch is bearable.
[[File:Crealityfans.JPG]]
* The fan in the print head is really noisy when running fast ("model fan" or "part cooling fan", making an annoying high pitch noise. At ~60% or below the pitch is bearable.
* The official creality PETG profile has the model fan at ~90% and the side fan at 0%, however this is so noisy and annoying lol
* The official creality PETG profile has the model fan at ~90% and the side fan at 0%, however this is so noisy and annoying lol
* Rana has changed the cooling profile so the model fan is max 60% and the side fan is running at 30% constantly. These settings are on the soldering bench computer too.
* Rana has changed the cooling profile so the model fan is max 60% and the side fan is running at 30% constantly. These settings are on the soldering bench computer too.

Navigation menu