251
edits
No edit summary |
|||
Line 51: | Line 51: | ||
== Note about noise and cooling == | == Note about noise and cooling == | ||
[[File:Crealityfans.JPG]] | [[File:Crealityfans.JPG]] | ||
* The fan in the print head is really noisy when running fast ("model fan" or "part cooling fan", making an annoying high pitch noise. At ~60% or below the pitch is bearable. | * The fan in the print head is really noisy when running fast ("model fan" or "part cooling fan"), making an annoying high pitch noise. At ~60% or below the pitch is bearable. | ||
* The official creality PETG profile has the model fan at ~90% and the side fan at 0%, however this is so noisy and annoying lol | * The official creality PETG profile has the model fan at ~90% and the side fan at 0%, however this is so noisy and annoying lol | ||
* Rana has changed the cooling profile so the model fan is max 60% and the side fan is running at 30% constantly. These settings are on the soldering bench computer too. | * Rana has changed the cooling profile so the model fan is max 60% and the side fan is running at 30% constantly. These settings are on the soldering bench computer too. | ||
Line 57: | Line 57: | ||
** Creality slicer 5.0 -> "Material" in the top right corner, click the down arrow, the nozzle and bed temp will show, click the pencil icon to the right of them. | ** Creality slicer 5.0 -> "Material" in the top right corner, click the down arrow, the nozzle and bed temp will show, click the pencil icon to the right of them. | ||
** The second tab is "Cools" (...lol), the speeds are changed under "Part cooling fan" (aka. print head fan, aka. model fan). The big side fan is "Auxillary part cooling fan". | ** The second tab is "Cools" (...lol), the speeds are changed under "Part cooling fan" (aka. print head fan, aka. model fan). The big side fan is "Auxillary part cooling fan". | ||
== Slicer - Creality Print 5.0 == | == Slicer - Creality Print 5.0 == |