3D Printers/Ender 5 plus: Difference between revisions

3D Printers/Ender 5 plus (view source)

83 bytes removed , 12 September

251

edits

@@ Line 134: / Line 134: @@
 Use the config bundle for prusa slicer, a copy is in this wiki under 'usage' and another copy is on the USB drive.
-Keep in mind that this printer has a 1mm nozzle installed. The slicer settings I uploaded set the line width to 1.2mm and layer height to 0.6mm. So for an object with 1 perimeter is the equivalent of 3 perimeters with a 0.4 nozzle (so decently strong). So for most objects 1 perimeter and 3 top/bottom layers is plenty of plastic and will be strong enough. This will save a shitload of time!!
+Keep in mind that this printer has a 1mm nozzle installed. So for an object with 1 perimeter is the equivalent of 2.5 perimeters with a 0.4 nozzle (so decently strong). So for most objects 2 perimeters and 4 top/bottom layers is plenty of plastic and will be strong enough. This will save a shitload of time!!
 ==A few random printing tips==