Type A: Difference between revisions
Jump to navigation
Jump to search
→Recommended Filament Settings: formatting edit
(→Recommended Filament Settings: formatting edit) |
|||
Line 128: | Line 128: | ||
** Costing Volume: 0.1 mm<sup>3</sup> (aprox. 150% the Cura 3 default value)<br />==> The '''new''' (experimental) Costing Feature of Cura 3 is what enables the above settings to provide a very noticeable improvement in the PETG print quality. Where using Costing together with a small retraction works far far better than using just retractions.<br /> | ** Costing Volume: 0.1 mm<sup>3</sup> (aprox. 150% the Cura 3 default value)<br />==> The '''new''' (experimental) Costing Feature of Cura 3 is what enables the above settings to provide a very noticeable improvement in the PETG print quality. Where using Costing together with a small retraction works far far better than using just retractions.<br /> | ||
* Alternate Skin Rotation: SELECTED | * Alternate Skin Rotation: SELECTED | ||
<br /> | <br /> | ||
NOTES: | NOTES: | ||
* The above settings are a "best compromise", to get '''good''' results, without limiting the print speed any more than necessary. | * The above settings are a "best compromise", to get '''good''' results, without limiting the print speed any more than necessary. |