Type A: Difference between revisions
Jump to navigation
Jump to search
→Status: update for loaded w/ Green iPrint3D PETG
m (→Cura 3 Settings: typo fix) |
(→Status: update for loaded w/ Green iPrint3D PETG) |
||
Line 9: | Line 9: | ||
* '''LIMITED USE''' ... only print using PETG (2nd Printhead for PLA coming.) | * '''LIMITED USE''' ... only print using PETG (2nd Printhead for PLA coming.) | ||
* The Printhead Heatsink Fan is '''always on''' ... so don't leave this printer powered on for long periods of time without printing. | * The Printhead Heatsink Fan is '''always on''' ... so don't leave this printer powered on for long periods of time without printing. | ||
* Loaded with 1.75mm | * Loaded with 1.75mm Green iPrint3D PETG | ||
* [[3D_Printers#Cura_15|Cura 15 Settings here]] | * [[3D_Printers#Cura_15|Cura 15 Settings here]] | ||
* '''http://octopi3.hacklab.to/'''</onlyinclude> | * '''http://octopi3.hacklab.to/'''</onlyinclude> |