Search results

Jump to navigation Jump to search

Page title matches

  • This page documents post-processing details for 3D Printing [[Category:3D Printing]] ...
    463 bytes (70 words) - 01:27, 16 June 2014

Page text matches

  • This page documents post-processing details for 3D Printing [[Category:3D Printing]] ...
    463 bytes (70 words) - 01:27, 16 June 2014
  • If you are new to 3D printing, or to HackLab's printers, please read [[#Your First Print|the section belo * Select print from the Prusa Mini menu. ''Do not leave printer alone during printing.'' ...
    9 KB (1,462 words) - 05:30, 3 March 2024
  • ...simplest you can view this as [http://en.wikipedia.org/wiki/CUPS CUPS] for 3D printers but it also allows for manual printer control and real time push-b * It can detect any 3D printer on the network (no need to change your workflow for new machines) ...
    4 KB (731 words) - 01:27, 16 June 2014
  • == Tips for printing with a big nozzle == ...uld divide the object into vertical sections, which higher detail sections printing at a low layer height, and low detail sections print with a higher layer he ...
    6 KB (1,064 words) - 23:23, 26 February 2024
  • ...ently, the working Ultimakers are hooked up to RaspberryPis sitting on the 3D Printer rack in The Hub, next to the Shop door. # The printer will automatically start printing once temperature is achieved. ...
    3 KB (574 words) - 16:14, 27 September 2015
  • The printer lives on the bottom shelf of the 3D printer tower. ...e the other moves down, to get the bed level. (Bed seems to stay level for printing once ajusted.) ...
    12 KB (1,980 words) - 02:39, 1 July 2020
  • | 3D Solutech PLA, white ...ttp://www.best3dprinterguide.com/flashforge-creator-x-review-dual-extruder-3d-printer/ ...
    15 KB (2,567 words) - 23:30, 26 February 2024
  • *2x Ultimaker 3D Printer *Type A Series 1 3D Printer ...
    4 KB (612 words) - 07:32, 16 January 2019
  • Printer lives on the second shelf of the 3D printer tower, below the [[FlashForge Creator Pro]]. * '''If a large solid area is under-extruding''' then try printing PLA at 220° and 110% Flow. ...
    11 KB (1,684 words) - 02:39, 1 July 2020
  • Type A lives on the third shelf of the 3D printer tower, next to [[Ultimaker 2]] ** PETG printhead in printer -- loaded with 1.75mm Blue iPrint-3D PETG. ...
    29 KB (4,680 words) - 02:42, 1 July 2020