Page history
7 November 2018
Allen
→Recommended Filament Settings: Finish Cura 3.4.1 PETG update (forgotten settings)
+296
Allen
→Cura 3 Settings for this Printer: housekeeping edit (3.3.1 to 3.4.1)
+11
Allen
→Recommended Filament Settings: Update settings to Cura 3.4.1 settings that WORKED REALLY WELL.
+1,013
Allen
→Recommended Filament Settings: Last edit to Cura 3.0.4 PETG settings (travel speed was toooo fast)
22 September 2018
Allen
→Status: typo fix again
m+10
Allen
→Status: toooo late typo fix
m−6
Allen
→Status: Remove line for Black Filaments.ca Black PLA
−30
Allen
→Status: also edit for Blue iPrint-3D PETG
−52
Allen
→Status: remove Y-axis shift note, after fixing this.
−94
Allen
→Machine Log
+1,612
20 September 2018
11 September 2018
7 September 2018
29 August 2018
22 July 2018
5 July 2018
Allen
→Recommended Filament Settings: formatting fix
mAllen
→Recommended Filament Settings: Add link to Legacy Cura 15.04.6 settings for PLA
+186
20 June 2018
Allen
→Known Issues and Fixes: update for work just done.
+87
Allen
→Cura 3 Settings for this Printer: formatting edit
m+8
Allen
→Recommended Filament Settings: formatting edit
−7
Allen
→Recommended Filament Settings
mAllen
→Recommended Filament Settings: finish last update
+399
Allen
→Recommended Filament Settings: note about aggressive PLA settings:
+118
Allen
→Cura 3 Settings for this Printer
m+12
Allen
→Cura 3 Settings for this Printer: formatting update of Cura 3 settings (printer definition)
−4
Allen
→Recommended Filament Settings: Update PETG settings for Cura 3.3.1
+466
Allen
→Machine Log: update for work done.
+185
14 June 2018
Allen
→Recommended Filament Settings: update for 75mm/s FASTEST speed that can be used with PLA.
+149
Allen
→Known Issues and Fixes
+113
Allen
→Status: update for Warped Print Bed replaced.
−234
Allen
→Machine Log
+278
13 June 2018
Allen
→Cura 3 Settings for this Printer: update for Cura 3.3.1 having Printer & Extruder tabs.
+58
Allen
→Recommended Filament Settings: CORRECT Coasting Volume value
15 May 2018
Allen
→Status: Update for filament on printer.
m−1
Allen
→Known Issues and Fixes: add ipg blue tape note
+112
27 April 2018
16 March 2018
Allen
→Recommended Filament Settings: formatting edit.
m+25
Allen
→Recommended Filament Settings: small update for PETG
+58
Allen
→Machine Log: update for no axis shifts.
+170
Allen
→Recommended Filament Settings: update PETG settings base on what now using
+992
15 March 2018
4 March 2018
Allen
→Machine Log: Update for rest of the work done last week.
+536
Allen
→Status: update for additional work done.
+82