Page history
14 June 2018
13 June 2018
Allen
→Cura 3 Settings for this Printer: update for Cura 3.3.1 having Printer & Extruder tabs.
+58
Allen
→Recommended Filament Settings: CORRECT Coasting Volume value
15 May 2018
Allen
→Status: Update for filament on printer.
m−1
Allen
→Known Issues and Fixes: add ipg blue tape note
+112
27 April 2018
16 March 2018
Allen
→Recommended Filament Settings: formatting edit.
m+25
Allen
→Recommended Filament Settings: small update for PETG
+58
Allen
→Machine Log: update for no axis shifts.
+170
Allen
→Recommended Filament Settings: update PETG settings base on what now using
+992
15 March 2018
4 March 2018
Allen
→Machine Log: Update for rest of the work done last week.
+536
Allen
→Status: update for additional work done.
+82
1 March 2018
28 February 2018
15 February 2018
Allen
→Machine Log: update for new failure mode.
+123
Allen
→Machine Log: additional info added
+210
Allen
→Machine Log: update for work done last week & this week.
+1,317
20 December 2017
Allen
→Machine Log
+595
Allen
→Recommended Filament Settings: update for settings I now use with PETG
+288
Allen
→Recommended Filament Settings: update based on usage
+442
Allen
→Status: update based on usage
+119
15 December 2017
Allen
→Known Issues and Fixes: fiberglass plate *fail* ... remove any mention of that.
−187
Allen
→Status: update based on usage.
+41
Allen
→Recommended Filament Settings
+327
Allen
→Known Issues and Fixes: + binder clips not
+187
Allen
→Status: update based on work done.
+166
26 November 2017
Allen
→Recommended Filament Settings: typo fix
mAllen
→Recommended Filament Settings
m−2
Allen
→Recommended Filament Settings: Additional Updates for PETG
+50
Allen
→Recommended Filament Settings
m+13
Allen
clarify Cura 3 setting title
+15
Allen
→Recommended Filament Settings
m−40
Allen
→Recommended Filament Settings: finish last update
+304
Allen
→Recommended Filament Settings: MAJOR update for PETG settings
−1,210
25 November 2017
17 November 2017
Allen
→Recommended Filament Settings
m+3
Allen
→Recommended Filament Settings: update based on use
−95
Allen
→Recommended Filament Settings: Update iPrint3D PETG based on use
+255
13 November 2017
12 November 2017
Allen
→Status: update for loaded w/ Green iPrint3D PETG
−16
Allen
→Cura 3 Settings: typo fix
m+6
Allen
ADD Cura 3 Settings Section MOVE the Features section up.
+1,733
Allen
→Recommended Filament Settings: typo fix
m+1
Allen
→Recommended Filament Settings: + infill overlap note + support pattern
+168
Allen
Filament Settings up one level & add iPrint3D PETG
+791
Allen
→Status: update based on last use
−41